Limitless~Control~On The Fly
Slingshot 200
The Slingshot 200 is a compact single-channel dimmer that supports wireless DMX control and has a maximum load capacity of 200 watts. It's an ideal choice for on-set practical fixtures as it features passive cooling for very quiet operation. The incorporated TimoTwo chip enables CRMX in both RX or TX modes and CRMX2 to be used with other CRMX2-capable devices.
The Slingshot 200 has WiFi node/gateway capability using sACN or Art-Net from your control software. This feature is useful for receiving DMX control and sending out a CRMX2 wireless signal to other units on set. It also has the option to input or output via the hardline 5-pin DMX connector. Plus, it comes with two side-mounted Edison dimmer output connectors that make placement easy.
The Slingshot 200 has an internal battery that is useful for setup and programming. Dimming is achieved with a hardline AC Edison attached via the convenient flat swivel Edison connector to powerCON TRUE1 input. You can rig the Slingshot 200 using the two handy 1/4-20 screw mounts on its body. The programming process is very fast using its built-in on-screen menu system with a selection wheel/push button or via the web GUI on its WiFi connection.
For on-set applications, the screen display provides a Fixture/Universe/Address label for easy identification. The Slingshot 200 offers adjustable dimmer curves for Incandescent/LED/Switchable/Hot Power for your control and practical needs.
Rent Slingshot 200
FEATURES:
- CUSTOM DESIGNED FOR 120V LED TUBES AND LOW-WATTAGE PRACTICALS
- RATED AT 200W, WITH OVER-CURRENT AND OVER-TEMPERATURE PROTECTION
- PROVIDES A SMOOTH DIM FROM 0-100% AND 100%-0%
- BUILT-IN CRMX WIRELESS TRANSCEIVER WITH 400 FEET RANGE
- COMPATIBLE WITH ALL WIRELESS RATPAC AND CRMX BASED PRODUCTS
- TWO 2.4GHZ EMBEDDED ANTENNAS FOR CRMX AND WIFI
- STATUS QUO WITH TIMEOUT OPTIONS
- AUTO AND CONFIGURABLE TIME FOR SCREEN-OFF AND BUTTON LOCK
- STATUS AND CONTROLS THROUGH WEB GUI (WIFI)
- INCANDESCENT: SAME AS LUNCHBOX DIM CURVE
- LED DIM: SAME AS LEGACY 12X200 DIM CURVE
- SWITCHABLE: <50%: OFF, >50%: ON
- HOT POWER
- POWERCON TRUE1 TOP, 120VAC 2A 200W
- CONVENIENT ROTATING AC PLUG TO TRUEONE PIGTAIL CABLE
- 200W DIMMING CONTROLLED
- TWO BLACK EDISON OUTPUTS
DATA INPUT SOURCE:
- 5-PIN XLR INPUT FOR DMX512 (8-BIT OR 16-BIT RESOLUTION)
- WIRELESS CRMX RECEIVE
- WIFI (ARTNET AND SACN PROTOCOLS)
- MANUAL
- WIRELESS CRMX TRANSMIT
- XLR PORT
- FAST OVER CURRENT > 7A
- OVER TEMPERATURE
- 2A THERMAL CIRCUIT BREAKER, SLOW PROTECTION FOR < 7A
- SHORT CIRCUIT
- RESETTABLE
3.93” X 3.36” X 2.60”
WEIGHT:
.96 LBS
MODEL:
SLINGSHOT 200
ETL LISTED FOR US & CANADA
AVAILABLE IN KITS OF 2, 6, OR 12 WITH AC INPUT CABLES AND RIGGING ACCESSORIES
| If Input is... | If Input is via WiFi | If Input is via CRMX | If input is via XLR | If input is set manually |
|---|---|---|---|---|
| Then output can be via WiFi? | NO | NO | NO | NO |
| Then output can be via CRMX? | YES | NO | YES | YES |
| Then output can be via XLR? | YES | YES | YES (With accessory Y-Cable) | YES |
